300 U Shape Baffle Ceiling Making Machine with Drop Suspended Ceiling System

产品主图

Main Specification of the baffle ceiling making machine:

Material: Aluminum

Material thickness: Aluminum 0.5-1.2mm | Galvanized steel Thickness: 0.5-0.8mm

U Shape Baffle Ceiling Size: bottom width: 30-100mm, flange height:75-300mm

Speed: 35m/min

Control: PLC Control

Driven method: Frequency conversion speed regulation control, with the main motor connected and driven with the worm gear reducer and the rollers.

Rolling speed: 30 m/min

Rolling material Gr12mov steel

Process Flow of the Baffle Ceiling Production Line:

Decoiler→ Leveling device→ Guiding device & Roll forming main machine → Straightener→  Hydraulic following cut-off system →  Run-out table

Details of each component of the U-shaped Baffle ceiling roll forming machine:

-Decoiler  3 Ton | Manual expansion and tight

– Leveling device： 21 rollers

-Roll forming main machine:

• Machine frame: Welded from steel plates and then processed by gantry milling.
• Stand structure: Independent gantry type
• Transmission mechanism: Controlled by frequency conversion speed regulation, with the main motor connected and driven through a worm gear reducer and rollers.
• Roll material: GCr15 bearing steel /S45C medium carbon steel / Cr12 mov steel, with surface polished and hard chrome plated.

-Hydraulic cut-off device

• The hydraulic system features a high-efficiency and environmentally friendly design, utilizing original Taiwanese hydraulic components.
• Cutting method: Servo tracking cutting without deceleration or machine stop.
• Equipped with 2 cutting blades.