Ceiling Main T Grid Roll Forming Machine

描述

Ceiling Main T grid, Cross T grid and Wall Angle. Together, they follow a simple logic: wall angles set the boundary, main runners form the load-bearing base, and cross tees refine the grid. This design ensures stability (resisting vibration or temperature shifts) and a uniform base for panels, making it essential for flat, safe, and neat ceilings in spaces from offices to homes.

Main Specifications:

Mode: Massca Main T Grid Roll Forming Machine

Product size: 32x24x3660mm

Applicable materials: Galvanized coil (GI); Prepainted galvanized coil (PPGI)

Material thickness: Galvanized coil: 0.2 – 0.3 mm; Prepainted galvanized coil: 0.15 – 0.23 mm

Product length: 3600 mm (metric)

Production speed: 6 – 7 pieces/minute (each piece with a length of 3600 mm)

Whole line speed: 0 – 35 meters/minute

Forming tolerance: 0.1 mm (height, width)

Length tolerance: 0.3 mm/meter

Total machine power: 26 KW

Power: 380V, 50Hz, 3 Phase

Unit size (L x W x H): 16 x 2x 1.3 m

Production Process:

Uncoiling (GI & PPGI) – Forming – Automatic punching & cutting – PLC control – Hydraulic system – Unloading

lay in ceiling ceiling main t grid machine process flow

Details of each component of the Main T grid roll forming machine:

Manual Decoiler 1000kgs*2 sets
Roll Forming Main Machine: Chain drive / Gear Drive Optional | 18 Groups of rollers, 2 sets straightener roller|

Stitching rollers: 4 pcs| 0-30m/min | Roller material: Cr12 mov | Indepent stands

Full automatic punching & cutting device:

Feature: Energy-storage type rapid stamping: Punching and heading are completed in one stamping process without a machine halt. (Note: It is currently the only manufacturer in mainland China and Taiwan that can complete punching and heading in one go without stopping the machine.)

Run-out table: 304 stainless steel; surface painted

描述

iNQUIRY NOW